Skip to content
-
-
-
-
- Specimen Mounts for SEM
-
- Specimen Mounts For Scanning Electron Microscopes Slotted head ½" dia. (12.7mm), pin ⅛" dia. (3.1mm), 8mm (H) Tapered end pin.
-
-
- Specimen Mounts for SEM
-
- Specimen Mounts For Scanning Electron Microscopes Surface 1" (25.4mm) x ½" (12.7mm) H, pin ⅛" (3.1mm) Dia Tapered end pin.
-
-
- Specimen Mounts for SEM
-
- Specimen Mounts For Scanning Electron Microscopes Head: 2" dia. (50mm), pin ⅛" dia. (3.2mm)
-
-
- Specimen Mounts for SEM
-
- A plastic tube and plug, used for large specimens. The pin mount ⅛" (3.1mm) in diameter is inserted securely to the plug and protected by the tube. Pin mounts can be up to 38mm diameter. Ideal for storage or mailing. Measurements are as follows: Internal Diameter of the tube is 1.53" (39mm). The outer measurements of the tube is 1.57"…
-
-
- Specimen Mounts for SEM
-
- Our versatile vacuum desiccator has been designed to be used in both SEM and TEM Applications. With the change of an accessory the desiccator is capable of being used with grids, pin mounts as well as SEM Mounts. The ability to store your grids and or mounts under vacuum eliminates any dust particles and contamination which may be airborne. The…
-
-
- Specimen Mounts for SEM
-
- Precision machined from a block of aluminum - anodized black - this Sample Stub Vacuum Desiccators accommodates 18 SEM Mounted Sample Stubs, pin style, under vacuum for year long. Compact and sturdy - will last as long as you own them, Prevents oxidation from occurring to the sample during long term storage All pin stubs are kept secure inside the…
-
-
- Specimen Mounts for SEM
-
- SEM Single Mount Storage Tube A plastic tube and plug. The pin mount ⅛" (3.1mm) in diameter is inserted securely to the plug and protected by the tube. Ideal for storage or mailing.
-
-
- Specimen Mounts for SEM
-
- SEM mount which is made from aluminum is used for the mounting and tilting of samples from 0° to 90° as well as for SEM investigation with small working distances. The mount is marked for 30°, 45°, 70° and 90°. The table measures 11 x 11 mm (0.46" x0.46") and the overall size is 14 x 14 x12.7 mm
-
-
- Specimen Mounts for SEM
-
- This tilt mount, made from aluminum, is used for the mounting and tilting of samples from 0°-90° in 10° increments. Allows for pin stubs up to 18 mm and fits specimens with a maximum size of 26 mm x 22 mm. Comes complete with screws and allen wrench.
-
-
- Specimen Mounts for SEM
-
- EDS Analysis Specimen Mount Angled mounts feature an orientation cross for precise positioning towards the EDS detector. Tilt 22° or 25° provides better detection and higher signal-to-noise ratio for x-ray analysis. Made from Aluminum