Capsule Molds are made from the strongest possible silicone rubber providing extremely high tear resistance. They are all reusable and produce embedding blocks of numerous shapes and sizes with a wide variety of tips. Mold which produces blocks to be used for re-embedding.
Cross Sectional Mold This unique mold made from clear silicone has 18 cavities. Each cavity measures 0.787" (20 mm) x 0.393" (10 mm) x 0.393" (10 mm) (L x W x D). Overall mold dimensions: 5⅛ (130 mm) x 4-9/64" (105 mm) x 19/32" (15 mm) (L x W x D). The mold has been tested to withstand 225°C.
Embedding Capsule Substitute Mold have 24 cavity mold produces a block similar to the embedding capsule block but with the following advantages: Resin polymerizes better in silicone rubber than in polypropylene or polyethylene - the rubber heats more evenly and retains the heat better than in plastic. It is easier to see inside the well when centering the specimen in…
Flat Embedding Molds A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath.
This deep well mold offers an inner depth of 11mm with a width of 35mm. The inner cavity has 66 cavities. Each cavity is 3⁄16" (4.7mm). Labelled A-F horizontally and 1-11 vertically. The overall dimensions of the mold are: 1¾ x 2¾ x ⅝" (45 x 70 x 16mm) thick. The inner dimensions are: 1.37 x 2.36 x .43" (35 x…
Multi-Well Embedding Mold This unique silicone mold comes in 3 different types of silicone, clear, white and blue, and has 2 different cavity sizes to meet all of your embedding needs.
Round Cavity Silicone Molds These molds are available in three different sizes and are made from blue silicone. 10 mm in diameter by 1.8 mm deep. There are 12 numbered cavities. 12.5 mm in diameter by 2.3 mm deep. There are 9 numbered cavities. 17.5 mm in diameter by 2.0 mm deep. There are 5 numbered cavities.
Square Face Mold features a wider tip area, which is perfect for embedding larger specimens with less resin, resulting in a larger initial section. Once solidified, the block can be glued to the end of a plexiglas rod or other holding device. Material: Blue silicone rubber Maximum temperature: 218°C (425°F) 30 Cavities: 61.5 x 72 x 6 mm thick Numbering…